HVAC, Water Heater & Electrical Services in East Lansing, MI

Completed scheduled Air Care Heating maintenance on Bryant furnace system. Replaced furnace filter and humidifier pad as requested, documented equipment condition with photos showing system operating properly with all components in good working order.

Completed annual HVAC maintenance service on residential furnace system. Performed comprehensive inspection of internal components including heat exchanger, gas valve assembly, blower motor, and electrical connections. Replaced air filter with new pleated media filter and evaporative cooler pad as required for system efficiency and optimal air quality.

Responded to service call for thermostat displaying erratic temperature readings that were fluctuating to impossible values. Accessed unoccupied property through garage as arranged and performed diagnostic evaluation of the Sensi brand digital thermostat and connected HVAC system. Inspected thermostat unit mounted on interior wall, examined wiring connections, and assessed communication between thermostat and furnace/air handler system in basement mechanical room. Documented equipment conditions and provided diagnostic findings to customer for approval of recommended repairs.

Completed full HVAC system installation including a 77,000 BTU furnace, 3-ton Lennox air conditioning unit with matching evaporator coil. The outdoor condensing unit was positioned on a pad in the rear yard with proper electrical disconnect and conduit installation, while condensate drainage lines were routed through the foundation. All mechanical connections were completed and the system was reconnected to existing infrastructure per permit specifications.

Installed a dedicated 15-amp GFCI outlet in the basement of a 1956 home to provide code-compliant power for a new sump pump system per contractor specifications. Verified proper grounding, tested GFCI protection functionality, and confirmed outlet placement in the unfinished basement area near existing plumbing infrastructure to accommodate the upcoming sump pump installation.

Responded to no cooling call on 4-year-old Lennox central air conditioning system. Upon arrival, found thermostat displaying 85°F ambient temperature while set to cool to 65°F, indicating system was not achieving desired temperature. Diagnosed and repaired cooling system failure, restored proper operation and verified unit now cooling effectively to setpoint.

Conducted comprehensive on-site evaluation of existing 16-year-old residential HVAC system including air conditioning unit and furnace located in basement mechanical room. Performed thorough inspection and documentation of current equipment configuration, ductwork layout, and system components to provide accurate full system replacement estimate. Photographed existing furnace with beige cabinet housing, air handler assembly, galvanized supply plenum, and associated ductwork routing for replacement specifications and equipment sizing requirements.

Responded to service call for inadequate cooling with indoor temperature reaching 80°F despite airflow present throughout home. Found outdoor condenser unit completely non-operational and heavily obstructed by overgrown vegetation including ferns and climbing plants restricting airflow to coil fins. Cleared all plant growth and debris from around unit perimeter and top grille, removed accumulated leaves and organic matter from fan assembly, and restored proper clearance specifications. Inspected condenser fan motor and capacitor, tested electrical connections, and restored power to outdoor unit. System returned to normal operation with proper heat rejection and indoor temperatures stabilizing.

Conducted on-site evaluation for mini split heat pump installation. Assessed existing electrical infrastructure, including 100A Bryant load center with available circuit capacity and sub-panel connections. Inspected current HVAC system consisting of Bryant furnace unit in basement mechanical room. Documented electrical panel configuration, available breaker positions, and wiring pathways to determine optimal installation routing for new mini split system. Photographed equipment locations and utility room layout to develop installation plan and equipment placement recommendations for heat pump outdoor condenser and indoor air handling units.

Completed annual air conditioning maintenance on Bryant condensing unit and air handling system per maintenance plan agreement. Performed comprehensive tune-up including inspection of outdoor condenser unit, verified proper operation of compressor and condenser fan motor, checked refrigerant levels and system pressures, inspected electrical connections and contactors, cleaned condenser coils, and examined condensate drainage lines. Inspected indoor air handler components, evaluated air filter condition and replaced filter media, verified blower motor operation and airflow, checked ductwork connections for proper sealing, and tested thermostat functionality. All system components operating within manufacturer specifications with no deficiencies noted. System cooling properly and ready for continued service.

Completed annual maintenance on residential air conditioning system. Inspected HVAC unit, ductwork, and condensate drainage system in basement mechanical room. Replaced two dirty pleated air filters with accumulated dust and debris. Verified proper operation of furnace/air handler unit and associated components. All equipment functioning within normal parameters at time of service completion.

Conducted comprehensive evaluation of existing 28-year-old heating and cooling systems for full replacement estimate. Inspected furnace and air conditioning equipment, both original installations from 1998, documented current system conditions including thermostat operation in cooling mode and examined internal components including heat exchanger and ductwork connections. Customer requesting replacement within approximately one month timeframe with no immediate operational concerns reported.

Completed full HVAC system installation including new furnace and 2-ton air conditioning condenser unit. Installed outdoor AC unit on right side of property with proper refrigerant line connections, electrical hookup, and conduit routing through mulched area. System positioned on prepared pad with all refrigerant lines insulated and secured, obtained mechanical permit for installation, and reconnected electrical service per code requirements.

Completed routine air conditioning maintenance on residential split system. Performed electrical diagnostics using multimeter to verify proper amperage draw and voltage readings at condenser unit. All measurements within manufacturer specifications, system operating normally with no issues identified.

Completed annual preventative maintenance on Lennox condensing unit. Inspected outdoor unit for proper operation, checked refrigerant levels, and verified electrical connections at disconnect box. Cleaned condenser coils and removed debris from around unit including mulch and vegetation growth near base. Evaluated and replaced air filters in indoor air handler, removing heavily soiled filters and installing new pleated media filters with foam gasket seals to ensure proper system airflow and filtration efficiency. Confirmed all system components operating within normal parameters upon completion of maintenance service.

Responded to American Standard thermostat displaying error Code 79. Upon inspection, found heavily soiled air filters in the HVAC system with significant dust and debris accumulation across the filter array. Documented equipment condition with photos showing the contaminated mesh filters requiring replacement or cleaning to restore proper system airflow and resolve the error code.

Completed comprehensive whole home electrical inspection of residential electrical system. Performed thorough evaluation of main electrical panel, verifying proper circuit breaker installation, labeling, and wire terminations. Inspected service entrance wiring, panel grounding, and overall system organization. Documented existing panel configuration showing multiple branch circuits with adequate breaker protection. Noted dense wire bundle at panel base and evaluated wire management and connections for code compliance. Assessed electrical meter installation and surrounding infrastructure. Provided photographic documentation of panel interior and exterior conditions for homeowner records.

Completed annual HVAC maintenance on Trane XR13 system, including inspection of furnace and outdoor condensing unit. Replaced air filter and evaporator pad, addressed hot spots identified during system evaluation, and documented equipment condition with photographic records for customer files.

Completed annual maintenance on residential split HVAC system including Bryant furnace and outdoor condensing unit. Performed comprehensive inspection of indoor and outdoor equipment, checked all electrical connections, verified proper operation of blower motor and condenser fan, inspected condensate drain system and PVC venting, and confirmed system functionality. Noted outdoor unit showing age-related weathering and surface corrosion on fan guard but equipment operating within normal parameters.

Performed comprehensive site evaluation and measurement documentation for replacement estimate of 36-year-old air conditioning outdoor unit. Assessed existing ductwork dimensions and system configuration, capturing detailed measurements of supply and return ducts to ensure proper sizing for new equipment installation. Documented current HVAC infrastructure including galvanized metal ductwork and connection points. Provided replacement recommendations and estimate for complete outdoor condensing unit replacement to restore reliable cooling capacity to the residence.