HVAC, Water Heater & Electrical Services in East Lansing, MI

Conducted comprehensive on-site assessment for complete HVAC system replacement at residential property with 20+ year-old non-operational equipment. Evaluated existing natural gas furnace located in basement and air conditioning condenser unit installed in recessed compartment beneath exterior deck structure. Documented current equipment configuration, including unique deck-mounted AC installation with built-in access hatch, electrical connections, and refrigerant line routing. Provided detailed replacement estimate for new furnace and air conditioning system to restore climate control functionality.

Responded to service call for intermittent hot water loss affecting entire household in 20-year-old residence. Inspected Bradford White Defender Safety System tanked water heater and diagnosed thermocouple failure causing pilot light to extinguish intermittently over previous 1.5–2 week period. Replaced faulty thermocouple, tested pilot assembly operation, verified gas valve functionality, and confirmed proper ignition sequence. Restored full hot water service to all fixtures throughout home.

Completed full HVAC system installation including 110,000 BTU furnace and 4-ton air conditioning condenser unit positioned on concrete pad at rear of property. Installed refrigerant lines and electrical conduit along exterior wall, reconnected all necessary connections, and integrated humidifier into system. All mechanical permits obtained and installation completed per specifications with equipment operational and tested.

Completed scheduled Air Care Maintenance on residential split-system HVAC equipment. Performed comprehensive inspection and preventive maintenance on outdoor condensing unit and indoor Lennox furnace system, including cleaning, filter service, and operational testing to ensure optimal cooling performance for the upcoming season.

Responded to no cooling complaint on five-year-old air conditioning system. Upon arrival, inspected indoor unit control board and thermostat wiring connections at terminal strip. Verified proper wire terminations at Y1, Y2, R, C, and W2 terminals, checked for loose connections or damaged wiring. Documented control board configuration and wiring setup with photos for service records. System evaluated and appropriate recommendations provided to restore cooling operation.

Completed routine Air Care Maintenance on Bryant HVAC system, including inspection of furnace and evaporator coil assembly. Noted significant oxidation and corrosion on copper evaporator coil with rust staining on cabinet housing, indicating age and moisture exposure. Replaced air filter at base unit and documented system condition with photographs for maintenance records.

Completed annual air conditioner maintenance tune-up on residential AC system. Performed comprehensive inspection of all components, checked refrigerant levels, tested electrical connections, cleaned condenser coils, and verified proper system operation. Replaced dirty air filter that showed significant dust and debris accumulation. System is functioning properly with no issues identified during service.

Conducted on-site evaluation of existing 20-year-old heating and cooling system for full replacement estimate. Inspected and photographed current Hager Fox furnace and air conditioning equipment in basement mechanical room. Documented existing system configuration, ductwork layout, and equipment specifications to provide comprehensive replacement options for complete HVAC system upgrade.

Completed routine Air Care Cooling maintenance on residential split system. Performed comprehensive inspection of outdoor condenser unit and indoor Bryant furnace/air handler assembly, verified proper operation of all components, documented equipment condition through photo documentation, and confirmed system is functioning within normal parameters for continued reliable cooling performance.

Completed annual cooling maintenance on Lennox outdoor condensing unit. Performed comprehensive system inspection, cleaned condenser coils showing significant dirt and organic buildup, and cleared debris from unit exterior. Unit operational with normal parameters upon completion of scheduled preventative maintenance service.

Responded to service call for furnace and hot water tank intermittently shutting off in basement location. Performed diagnostic inspection of aging HVAC system, including examination of furnace internal components, blower motor assembly, heat exchanger, electrical connections, and capacitor. Assessed ductwork connections and overall system operation to identify cause of equipment cycling issues.

Completed estimate for full HVAC system replacement including furnace and air conditioning unit. Existing 12-year-old natural gas furnace and AC system located in basement are non-operational and require replacement. Assessed installation site in unfinished basement utility area with exposed framing and evaluated exterior condensing unit mounting location on building exterior with vinyl siding. Provided replacement options for complete heating and cooling system to restore climate control functionality.

Responded to no cooling complaint on 8-year-old residential AC system. Upon arrival, inspected outdoor condenser units and indoor Luxaire furnace/air handler with access panel opened for diagnostic evaluation. Performed system assessment including electrical connections at disconnect box, refrigerant lines, and internal components. Documented equipment condition and configuration with photographic evidence showing dual outdoor units, ductwork, control boards, and wiring harness for service records.

Completed callback service to seal gap between furnace and evaporator coil using metal tape to ensure proper air sealing and system efficiency. This follow-up addressed a minor installation detail from the recent complete HVAC system installation that included a 70,000 BTU furnace, 2-ton air conditioning unit, humidifier, liner, and new electrical circuit. System inspected and verified operating within manufacturer specifications with all components properly sealed and secured.

Performed standard air conditioning tune-up and system inspection. Conducted electrical diagnostics using digital multimeter, recording capacitor readings of 33.16 and 29.02 microfarads to verify proper compressor and fan motor operation. All measurements within acceptable parameters for continued system performance.

Responded to no cooling call on central air conditioning system over 15 years old. Upon arrival, located outdoor condensing unit installed beneath deck structure in recessed area. Performed diagnostic evaluation of system components and documented equipment condition with photos showing cylindrical condenser with copper fan guard, black vertical fins, refrigerant lines, and electrical disconnect box mounted on wooden framing.

Completed full HVAC system installation including a 110,000 BTU furnace and 4-ton air conditioning unit with rear discharge configuration in basement utility area. Installed new PVC vent piping with proper routing through exterior wall, reconnected all ductwork to existing galvanized sheet metal distribution system, and integrated humidifier into new furnace. All mechanical permits obtained prior to installation, system tested and operational upon completion.

Conducted on-site evaluation of existing 16-year-old air conditioning system and 15-year-old water heater for replacement estimate. Documented current York furnace installation, water heater configuration with copper piping and gas connections, and existing PVC drainage and venting systems in basement mechanical room. Assessed equipment condition, measured installation area, photographed current setup including ductwork connections and utility configurations to provide comprehensive replacement proposal for both HVAC cooling system and water heating equipment.

Responded to service call for non-operational basement air purifier unit over twenty years old. Performed comprehensive assessment of IAQ equipment and surrounding mechanical systems including evaluation of unit condition, electrical components, and operational viability. Documented existing installation with photos showing equipment location in basement mechanical room alongside HVAC infrastructure, plumbing connections, and ductwork. After thorough inspection, determined unit age and condition warranted replacement rather than repair. Provided customer with professional assessment findings and disposal recommendations for aged equipment.

Completed full system estimate for 15-year-old air conditioning system requiring replacement due to confirmed evaporator coil leak. Assessed existing outdoor condensing unit, indoor air handler installation in utility room, refrigerant line set routing along exterior wall, and electrical connections. Documented current system configuration including ductwork connections, condensate drainage via PVC piping, and equipment placement for replacement planning.