HVAC Repair & Electrical Services in Okemos, MI

Responded to service call for non-operational air conditioning system following tripped breaker on 4-month-old equipment. Reset breaker and inspected outdoor condensing unit for potential electrical faults, refrigerant issues, or component failures that may have caused the overcurrent condition. System evaluated and restored to normal operation with both parts and labor remaining under warranty coverage.

Completed annual cooling maintenance on HVAC system. Performed comprehensive diagnostics using digital multimeter, recording voltage readings of 55.5V and 188.9V at various system components to verify proper electrical operation. Replaced furnace filters and inspected all cooling system components to ensure optimal performance for the upcoming season.

Completed annual cooling maintenance on outdoor condenser unit. Performed standard ACM inspection, replaced air filter and evaporator pad as scheduled, cleaned condenser coils of accumulated dust and debris, and verified system operation. Unit tested and left in proper working condition.

Completed annual cooling maintenance on residential HVAC system. Performed comprehensive inspection of indoor air handler unit and outdoor condenser unit, verified proper operation of all components, checked electrical connections and refrigerant lines, and documented equipment condition with photographs. All systems operating within normal parameters upon completion of scheduled maintenance visit.

Responded to customer report of air conditioning system failure with complete loss of cooling throughout the home. Conducted comprehensive assessment of existing HVAC system, including evaluation of outdoor condensing unit and indoor air handling equipment. Documented existing Lennox furnace installation in basement mechanical room with associated ductwork configuration. Provided detailed replacement estimate for new air conditioning system to restore cooling capacity to the residence.

Completed annual cooling maintenance on Bryant HVAC system. Inspected evaporator coil and found heavy dust and debris accumulation throughout, particularly on the inlet side, which was restricting airflow and reducing system efficiency. Pulled and replaced air filter, inspected all accessible components including refrigerant lines, condensate drain system, and ductwork connections, and documented equipment condition with photographs for service records.

Completed comprehensive A/C tune-up on 13-year-old system. Performed visual inspection of evaporator coil, noting frost accumulation on refrigerant lines indicating proper cooling cycle operation. Verified electrical performance at outdoor condensing unit with multimeter readings confirming adequate voltage supply at 345.7 volts. All system components operating within normal parameters at time of service completion.

Conducted comprehensive evaluation of existing HVAC system for full replacement estimate. Assessed current air handler unit installed in utility closet and documented equipment configuration including ductwork connections, condensate drainage, and electrical components. Photographed existing mechanical installations to provide accurate system specifications for replacement proposal.

Completed annual cooling maintenance on residential HVAC system. Inspected indoor air handler unit and replaced furnace filter with new mesh filter panel installed in metal frame housing. Verified proper airflow through ductwork and connections. Proceeded to outdoor condensing unit for exterior inspection. Examined beige AC unit mounted on plastic pad against building foundation. Inspected fan grille, louvered vents, and refrigerant line connections. Verified electrical conduit routing and manufacturer specifications. Confirmed unit operating within normal parameters with no visible signs of damage or wear. All components functioning properly upon completion of maintenance service. Wore shoe covers per customer request throughout interior portion of service call.

Completed semi-annual air conditioning maintenance inspection on residential HVAC system located in attic space. Performed standard ACM checklist including filter replacement, visual inspection of ductwork and condensate drain line, and equipment operational verification. System components including flexible ductwork, drain piping with mounting straps, and air handling unit were inspected and found to be functioning properly with no immediate service needs identified.

Conducted on-site evaluation for new whole home generator installation at a manufactured home. Assessed existing electrical panel configuration, available space in utility closet, and determined load requirements based on current 200-amp service with dual-column circuit breaker arrangement. Documented panel location, copper conduit routing, and identified optimal transfer switch placement for future generator integration with main electrical system.

Completed comprehensive ComfortGuard Maintenance Package on four-year-old Lennox furnace and air conditioning system. Performed full AC tune-up on outdoor condenser unit, including inspection of fan motor, compressor operation, refrigerant levels, electrical connections, and capacitor testing. Cleaned condenser coils and removed debris accumulation from exterior cabinet panels. Conducted indoor furnace inspection, verifying blower motor operation, heat exchanger integrity, gas valve function, and ignition system performance. Tested all safety controls, measured temperature rise across heat exchanger, and verified proper airflow throughout system. Replaced air filter and documented system operating pressures and temperatures. Both heating and cooling systems operating within manufacturer specifications with no immediate repairs required. Recommended exterior cabinet cleaning for condenser unit to prevent corrosion and maintain efficiency. All diagnostic measurements recorded using calib

Conducted on-site evaluation for air conditioning replacement at residential property. Existing 30-year-old AC unit is non-operational and requires full replacement. Assessed attic-installed HVAC system including Bryant furnace with associated ductwork and determined air conditioning equipment specifications needed for quote preparation. Documented existing equipment configuration, ductwork connections, and installation conditions through photographic evidence to support replacement estimate.

Successfully installed a 75-gallon Bradford White tanked water heater in basement utility area. Completed all necessary plumbing connections including copper supply lines with shut-off valves, proper venting with metallic vent pipe extending to code-compliant termination point, and reconnection of all water supply systems. Installation performed in accordance with mechanical permit requirements and manufacturer specifications.

Completed scheduled Air Care Cooling maintenance on Lennox HVAC system, model 7X5C61A5C+1. Performed comprehensive inspection of evaporator coil assembly, verified A-frame coil configuration and aluminum fin condition, checked refrigerant line connections and insulation integrity, and documented system specifications per manufacturer guidelines.

Completed annual cooling maintenance on residential air conditioning system. Inspected outdoor condenser unit for proper operation, cleared debris from surrounding area, and verified adequate airflow through coil louvers. Replaced dirty air filter with accumulated dust buildup to restore proper system airflow and indoor air quality.

Returned to site to replace defective evaporator coil under warranty coverage. Installed new Lennox evaporator coil (model 29a26) per manufacturer specifications. Evacuated system, charged with proper refrigerant amount as verified by calibrated Elitech LMC-200A refrigerant scale showing 91.9 lbs, and confirmed system operation with all parameters within normal range.

Completed annual cooling maintenance on Bryant condenser unit. Performed comprehensive system inspection, verified temperature differential at 18.7°F indicating proper refrigerant charge and heat exchange, and confirmed unit operational status with all components functioning within manufacturer specifications.

Completed annual HVAC maintenance inspection on residential furnace and air handling system. Performed standard ACM protocol including filter replacement, system diagnostics, and visual inspection of ductwork and components to ensure proper operation for continued heating and cooling efficiency.

Conducted on-site assessment for replacement estimate of 15+ year old natural gas furnace and air conditioning system located in basement. Evaluated existing HVAC installation including furnace with integrated humidifier, PVC condensate drainage lines, ductwork configuration, and exterior electrical service connections to provide comprehensive equipment replacement recommendations for Air Care Member.