HVAC Repair & Electrical Services in Okemos, MI

Performed comprehensive air conditioning tune-up on outdoor condensing unit, including electrical diagnostics with digital multimeter to verify system voltage and amperage readings. All measurements were within manufacturer specifications, condenser coils inspected, and unit confirmed operational for the cooling season.

Completed comprehensive 5-year ComfortGuard maintenance inspection on heating and cooling system. Performed thorough cleaning of internal components including blower assembly, control board area, and housing using specialized cleaning tools and microfiber materials. Inspected all electrical connections, wiring harnesses, and safety controls for proper operation and secure mounting.

Completed annual cooling maintenance on residential air conditioning system. Connected manifold gauges to outdoor condenser unit and verified refrigerant pressures within manufacturer specifications. Inspected condenser coil condition, fan motor operation, and electrical connections at disconnect box. Unit operating properly with no deficiencies noted at time of service.

Completed comprehensive air conditioning tune-up on residential system. Performed inspection of indoor blower motor assembly, verified proper operation and documented equipment serial numbers. Conducted outdoor condenser unit evaluation, checked refrigerant pressures using manifold gauges, and confirmed system operating within manufacturer specifications.

Completed annual cooling maintenance on Bryant HVAC system. Performed comprehensive inspection of furnace unit, air handler, and associated ductwork including metallic vent piping and connection points. Inspected and serviced air filter, verifying proper airflow and system operation with no issues identified during the maintenance visit.

Completed electrical estimate for replacement of existing whole home generator system. Evaluated current Kohler generator unit installed on concrete paver pad in backyard with proper clearances and ventilation. Assessed electrical infrastructure including Kohler transfer switch and associated wiring in basement utility area to ensure compatibility with replacement unit specifications.

Completed annual cooling maintenance on HVAC system. Performed electrical diagnostics using multimeter, verified voltage readings at outdoor condenser unit registering 503V, inspected compressor and heat exchanger components, checked electrical connections and junction boxes in mechanical room, and documented equipment condition with photos. All components operating within normal parameters upon completion of maintenance inspection.

Conducted on-site assessment for whole-house generator installation at single-family residential property. Evaluated electrical service panel location, existing utility infrastructure, and optimal generator placement near basement utility area with accessible floor drain for condensate management. Documented interior electrical load requirements including major appliances and provided recommendations for appropriate generator sizing and automatic transfer switch installation to meet homeowner's backup power needs.

Completed annual cooling maintenance on Lennox outdoor condensing unit. Inspected electrical connections, refrigerant lines, and condenser coil condition. Unit operational with no issues identified during service visit.

Conducted on-site evaluation of 16-year-old furnace system experiencing condensation issues beneath unit. Assessed existing HVAC equipment and extensive PVC condensate drainage system in mechanical room. Provided comprehensive replacement estimate for new furnace installation to address moisture concerns and aging equipment failure.

Provided comprehensive estimate for replacement of 2009 furnace and air conditioning system currently located in basement. Assessed existing outdoor condenser unit and indoor equipment, documented current operational status, and presented options for upgraded HVAC system to improve efficiency and reliability.

Responded to customer report of condensation beneath furnace unit. Upon inspection, found significant rust staining on interior cabinet panels adjacent to evaporator coil, indicating prolonged moisture exposure from condensate drainage issues. Documented existing water damage with photos showing rust streaks on white metal surfaces near coil assembly. Unit is 16 years old and no longer under warranty.

Responded to no heat call on recently installed HVAC system. Upon arrival, inspected thermostat operation and verified settings, then accessed unit interior to examine blower motor assembly, wiring connections, and control board for proper installation and functionality. Documented system components and configuration with photos for warranty and quality assurance purposes.

Completed annual cooling maintenance on residential HVAC system. Performed comprehensive inspection of indoor furnace unit located in basement utility area and outdoor condenser unit, verifying all components operational and properly connected. Documented equipment condition with photographs showing copper refrigerant lines, ductwork connections, and condenser coil in serviceable condition with no immediate repairs required.

Completed full HVAC system installation including a Lennox 110,000 BTU furnace and 3.5-ton air conditioning unit with right-side configuration in basement utility area. Installed furnace on drain pan with proper condensate drainage using white PVC piping, connected supply and return ductwork to unit top, and routed refrigerant lines with black insulation to outdoor condenser. Reconnected humidifier to new system, established all electrical connections, and verified proper airflow distribution through existing ductwork. All equipment installed per manufacturer specifications with appropriate safety labels visible and accessible for future service.

Completed seasonal air conditioning maintenance and tune-up on outdoor condensing unit as part of annual service plan. System was operational upon arrival. Performed comprehensive inspection of beige/tan condenser unit including examination of fan motor assembly, condenser coils with vertical fins, electrical connections, and refrigerant levels. Verified proper operation of compressor and condenser fan with black circular guard. Inspected unit mounting on polymer pad for stability and proper drainage. Checked PVC condensate line for clear flow and proper drainage away from foundation. Cleaned debris including leaves and organic matter from around unit base and verified adequate clearance from house siding for proper airflow. System tested and confirmed operating within normal parameters, ready for cooling season.

# HVAC Maintenance - ACM Completed comprehensive spring tune-up on 49-year-old forced air air conditioning system. Upon arrival, system was operating normally. Performed standard preventive maintenance protocol including visual inspection of outdoor condensing unit, which revealed significant age-related corrosion on coil assembly and metal banding, consistent with equipment of this vintage. Connected manifold gauge set to service ports and recorded operating pressures and temperatures. Evaluated refrigerant charge levels and system performance parameters. Inspected condenser coil for debris accumulation and airflow restrictions. Examined electrical connections, contactors, and capacitor condition. Verified proper operation of condenser fan motor and compressor. Checked refrigerant line insulation and service valve integrity. Assessed condensate drain line for proper drainage. Inspected mounting hardware and cabinet condition, noting exterior weathering and rust formation on metal c

Completed annual preventive maintenance on residential outdoor condensing unit located beneath elevated deck structure. Performed comprehensive inspection of cylindrical unit including fan motor operation, electrical connections, refrigerant pressures, and condenser coil condition. Cleaned debris from top cover and verified proper airflow through wire mesh grille and fan assembly. Inspected PVC condensate drain line for proper operation and drainage. Unit operating within normal parameters upon completion of scheduled maintenance service.

Performed annual HVAC maintenance on Bryant furnace system in residential mechanical room. Conducted thorough inspection of heat exchanger assembly, verified integrity of U-bend tubes and mounting connections, examined PVC venting system and ductwork connections, and documented system condition through photographic records. All components found operating within normal parameters with proper airflow and no visible defects noted in heat exchanger or cabinet assembly.

Completed full HVAC system installation including a 110,000 BTU high-efficiency furnace with humidifier and 3.5-ton air conditioning unit. Installed furnace in basement utility area with proper venting using white PVC piping, connected metallic ductwork with pyramid plenum configuration, and mounted all necessary electrical controls and condensate drain lines. Positioned outdoor condenser unit on composite base pad with appropriate clearance from structure, ran insulated refrigerant lines to exterior disconnect box, and reconnected all electrical components. System tested and operational upon completion, with all mechanical permits obtained prior to installation.