HVAC, Electrical & Water Heaters in Holt, MI

Returned to site to replace defective condenser coil on Lennox HVAC system. Removed existing coil and installed new Lennox replacement coil (model 33W96, serial number AE03013228). Connected refrigerant lines, performed leak test, evacuated system, and recharged with proper refrigerant amount per manufacturer specifications. Verified proper operation of outdoor condensing unit and confirmed system cooling performance before completing service on a cash-on-delivery basis under purchase order 1351330-001.

Completed comprehensive whole home electrical inspection in response to customer concerns about occasional smoky smell near rear of property and to verify electrical system safety following recent siding installation work. Thoroughly examined main electrical service panel, which is mounted on exposed studs in unfinished utility area, noting mixed-age wiring installation with varying levels of organization and visible debris accumulation in panel enclosure. Inspected all circuit breakers, neutral/ground bus bars, and wire connections for proper installation, signs of overheating, arcing, or other safety concerns. Evaluated wire routing, conduit connections, and overall panel condition. Also inspected accessible plumbing and mechanical systems in utility areas during walkthrough. Found no immediate electrical hazards or evidence that smoky smell originates from electrical system; advised customer that odor is likely from external source as suspected. Provided on-site estimate for panel c

Performed site evaluation for outdoor natural gas standby generator installation at residential property. Assessed existing electrical service panel capacity, natural gas infrastructure including metering and piping locations, and identified optimal placement area for generator unit considering clearance requirements and utility access. Documented basement mechanical room configuration showing current HVAC system, plumbing infrastructure, and available routing paths for electrical conduit and gas line extensions. Evaluated electrical load requirements and transfer switch placement options to ensure proper integration with existing 25-year-old residential electrical system. Photographed utility connections, concrete pad placement area, and potential wire routing from proposed exterior generator location to interior electrical panel. Compiled technical specifications and equipment recommendations comparing Generac and Kohler generator models suitable for property size and power requireme

Completed annual cooling maintenance on residential HVAC system. Utilized refrigerant manifold gauges to verify proper system pressures and refrigerant charge levels, ensuring optimal cooling performance for the upcoming season.

Responded to no-cooling complaint on 3-year-old system with alert code 292 indicating blower motor start fault and error code 429. Accessed furnace unit, inspected internal components and wiring harnesses, and diagnosed blower motor failure preventing proper system operation. Replaced defective blower motor under parts and labor warranty, verified all electrical connections, tested system startup sequence, and confirmed proper cooling operation with no fault codes present.

Responded to no cooling complaint with reported oil substance leak underneath outdoor unit. Upon arrival, performed comprehensive system inspection and utilized infrared refrigerant leak detector to diagnose issue. Identified refrigerant leak in system requiring repair, supplied necessary parts for resolution while customer declined labor coverage.

Completed annual preventative maintenance on 5-year-old Goodman central air conditioning system (Model: CNPVP3017ALAAAAA, Serial: 2019X46522) utilizing R-410A refrigerant. Performed comprehensive tune-up inspection including electrical diagnostics with amp draw readings, verified proper system operation, and confirmed all components functioning within manufacturer specifications. System found in good working condition with no issues identified during service visit.

Completed annual cooling maintenance on Carrier indoor air handler unit, model CNPVP3617ALAAAAA, serial number 0818X29686. Performed comprehensive inspection of R-410A system components, verified proper refrigerant labeling and safety notices, and documented equipment condition through photographic records. All manufacturer specifications and operational parameters were confirmed to be within acceptable ranges for continued system operation.

Performed routine preventative maintenance on a six-year-old Bryant residential air conditioning system. Conducted comprehensive system inspection including refrigerant levels, electrical connections, and condensate drain operation. Replaced air filters with new units to ensure proper airflow and system efficiency. Verified all components operating within normal parameters with no deficiencies noted. System is functioning properly and ready for continued service.

Responded to no hot water complaint caused by pilot light failure on tanked water heater. Inspected burner assembly, thermocouple, and gas control valve to diagnose ignition system malfunction. Cleaned pilot assembly, tested thermocouple output, and verified proper gas flow to restore reliable pilot operation and return unit to normal heating function.

Completed comprehensive Air Care Heating and Cooling maintenance service on residential HVAC system. Performed thorough inspection of gas furnace components including burner assembly, gas valve, pressure switches, and blower motor; all components found operating within normal parameters with proper electrical connections secured. Conducted outdoor condenser unit evaluation with refrigerant pressure diagnostics using manifold gauges; system pressures measured and confirmed within manufacturer specifications. Replaced air filter as part of routine maintenance protocol to ensure optimal airflow and system efficiency.

Performed estimate for air conditioning system replacement in basement location. Existing unit is non-operational and outdated. Documented current HVAC equipment configuration including air handler, ductwork system, and condensate drainage lines. Assessed installation area showing metal supply and return ducts with significant dust accumulation, PVC condensate piping, and electrical connections. Measured existing equipment dimensions and clearances for replacement unit specifications. Provided comprehensive estimate for complete A/C system replacement with applicable service credit toward new installation.

Completed full HVAC system installation including a Lennox 70,000 BTU gas furnace, 2-ton air conditioning unit (model ML14XC1S-024-7J), and whole-home humidifier in basement location. Performed all mechanical and electrical connections, installed PVC venting and condensate drainage systems, connected supply and return ductwork with flexible transitions, and reconnected existing electrical circuits to new equipment. System tested and operational upon completion, with utility rebate applications submitted to BWL and Consumers Energy, and financing documentation processed through Michigan Saves program.

Completed full HVAC system installation including a 70,000 BTU furnace with humidifier and 2-ton air conditioning unit with evaporator coil. Installed new refrigerant lines with proper insulation, mounted outdoor condenser unit on prepared gravel base with brick border, and completed all electrical connections including disconnect box. Performed mechanical and electrical rough-in work, reconnected all ductwork and drainage lines, and ensured all components were properly commissioned and operational per manufacturer specifications.

Completed annual ComfortGuard maintenance package on three-year-old furnace and air conditioning system. Performed comprehensive AC tune-up including refrigerant level verification, condenser coil inspection, electrical connection testing, and airflow measurements. Conducted furnace inspection with burner assembly examination, heat exchanger visual inspection, gas pressure testing, and safety control verification. All system components operating within manufacturer specifications with no deficiencies noted. Photographed equipment condition for service records. Both heating and cooling systems tested successfully and left in proper working order.

Responded to no cooling call affecting entire residence. Upon arrival, inspected outdoor condenser unit located in backyard. Unit appeared to be in serviceable condition with no visible external damage to housing or components. Performed diagnostic evaluation to identify cause of system failure. Verified power supply to unit, checked refrigerant levels, and tested capacitor and contactor operation. Identified failed component preventing compressor operation. Replaced defective part and restored system to normal cooling operation. Cycled unit through complete cooling cycle to confirm proper function. System operating within manufacturer specifications at time of departure.

Conducted comprehensive full system estimate for 16-year-old air conditioning and furnace system requiring immediate replacement. Performed detailed measurements and photographic documentation of existing HVAC equipment, ductwork dimensions, and condensate drainage system. Assessed equipment condition noting moisture staining and mineral deposits on unit panels indicating long-term condensation exposure, evaluated duct sizing and configuration, and documented current mechanical room layout to provide accurate replacement system specifications and installation requirements.

Completed comprehensive ComfortGuard Maintenance Package on residential outdoor air conditioning condenser unit. Performed standard preventive maintenance procedures including system inspection, cleaning of exterior components, and verification of proper operation. Unit showed significant environmental weathering and organic debris accumulation on exterior panels, which is typical for outdoor equipment exposure; documented existing cosmetic condition with photographs for service records.

Responded to no cooling complaint where homeowner reported excessive cooling and continuous system operation. Upon arrival, verified thermostat operation using calibrated digital thermometer, confirming accurate temperature reading of 74°F matching setpoint. Inspected modern touchscreen thermostat showing proper communication with system, displaying correct zone temperature, outdoor conditions, and humidity levels. Examined multi-zone control relay panels and associated wiring connections in mechanical room, finding all components functioning as designed. Determined unit was operating normally per thermostat demand with no equipment malfunction present. Educated homeowner on proper thermostat operation and advised against closing registers as this restricts airflow and can cause system issues. Recommended keeping all supply registers open for proper system balance and air distribution throughout home.

Completed full HVAC system installation including a 90,000 BTU furnace and 3-ton air conditioning unit with rear discharge configuration. Obtained mechanical and electrical permits prior to installation, installed complete ductwork system in basement utility area, and reconnected all electrical components to existing service. System tested and operational upon completion, with all required documentation processed for utility rebate programs through BWL and Consumers Energy.