HVAC, Water Heater & Electrical Services in East Lansing, MI

Completed annual cooling maintenance on air conditioning system. Performed comprehensive system inspection including electrical diagnostics using digital multimeter to verify proper voltage readings and capacitor functionality. All measurements recorded within normal operating parameters, confirming system is operating efficiently for the cooling season.

Provided estimate for replacement of 17-year-old non-functional air conditioning system with outdoor condenser unit located at exterior foundation and indoor air handler/ductwork installed in basement. Assessed existing natural gas furnace system and HVAC infrastructure including refrigerant lines, electrical connections, and metallic ductwork with plenum configuration to determine compatibility and replacement requirements for complete cooling system installation.

Completed annual cooling maintenance on residential Bryant HVAC system. Performed comprehensive inspection of furnace unit, ductwork connections, and associated components. Conducted electrical diagnostics using digital multimeter to verify proper system operation and measured voltage and amperage readings to ensure equipment was functioning within manufacturer specifications. All components found to be clean and well-maintained with no visible signs of deterioration or operational issues.

Completed comprehensive annual AC maintenance tune-up on central air conditioning system. Performed full system inspection of indoor air handler and outdoor condensing unit, checked refrigerant levels and pressures, cleaned condenser coils, inspected electrical connections and capacitors, verified thermostat operation, tested system startup and shutdown sequences, and confirmed proper airflow throughout the system. All components found operating within normal parameters with no deficiencies noted at time of service.

Completed comprehensive five-year Air Care maintenance service for both heating and cooling systems. Performed electrical diagnostics and resistance testing using digital multimeter to verify proper component operation and system integrity. All measurements fell within manufacturer specifications, confirming optimal system performance for continued reliable operation.

Completed preventive maintenance on two Lennox air conditioning units. Performed comprehensive system inspections including checking refrigerant levels, testing electrical connections, cleaning condenser coils, inspecting fan operation, and verifying proper airflow through all components. Both units found to be operating within normal parameters with no immediate service needs identified.

Completed annual AC tune-up and maintenance on 1-year-old Lennox system. Performed comprehensive inspection of outdoor condenser unit, verified proper operation of all components, and inspected indoor air handler with blower assembly and filtration system. System operating properly with no issues identified; all components functioning within normal parameters.

Completed scheduled air conditioning maintenance on residential HVAC system. Performed comprehensive inspection of furnace unit and associated equipment, verified proper operation of all components, and checked refrigerant lines and ductwork connections. Inspected and documented condition of air filter, noting accumulated debris and particulate buildup requiring monitoring. Assessed water heater installation in utility area and confirmed all safety labels visible and accessible. System operating within normal parameters at time of service completion.

Completed annual cooling maintenance on Bryant furnace system. Inspected unit, which showed normal dust accumulation from regular operation. Evaluated existing Glasfloss air filter with pleated media and cardboard frame for condition and replacement needs. Checked condensate drainage lines, refrigerant connections, and ductwork connections for proper operation. System operational and ready for cooling season.

Completed comprehensive tune-up on 21-year-old residential air conditioning system located on exterior concrete pad. Performed full system inspection, cleaned condenser coils, checked refrigerant levels, tested electrical connections, verified proper airflow through both outdoor units, and confirmed all components operating within manufacturer specifications.

Completed annual cooling maintenance on residential air conditioning system. Inspected outdoor condenser unit, noting heavy accumulation of dirt and debris on exterior filter panel which was cleaned during service. Performed standard ACM checklist including inspection of condenser coils, verification of proper unit operation, and documentation with photographic records of equipment condition before and after service.

Performed annual cooling maintenance on residential HVAC system. Inspected evaporator coil in attic air handler, noting dust accumulation on coil surfaces and serpentine tubing assembly. Checked furnace and air handler equipment in basement mechanical room, verified proper operation of condensate drainage system and PVC piping connections. Replaced air filter and documented equipment condition with photographs for service records.

Provided comprehensive estimate for air conditioning system replacement in basement location. Current AC unit from 1987 remains operational but has exceeded expected service life. Evaluated existing installation including air handler, ductwork configuration, condensate drainage system, and electrical connections to determine proper replacement specifications and equipment sizing requirements for new high-efficiency cooling system.

Responded to no-heat call on 22-year-old forced air furnace. Upon arrival, confirmed unit would not initiate heating cycle when thermostat was raised. Removed front access panel and performed diagnostic inspection of internal components including blower motor, electrical connections, and control board. Identified failed ignition system preventing burner operation. Due to age of equipment and availability of replacement parts for this legacy system, advised homeowner of repair options and recommended evaluation of full system replacement given unit has exceeded typical service life expectancy. Documented equipment condition with photographs showing internal components and overall installation. Unit remains non-operational pending homeowner decision on repair versus replacement.

Completed annual cooling maintenance on Lennox outdoor condensing unit. Performed comprehensive system inspection, changed air filter and evaporator pad, cleaned condenser coils, and verified proper operation of all components with unit cycling normally upon completion.

Completed annual cooling maintenance on HVAC heat pump unit. Inspected refrigerant lines, evaporator coil, and heat exchanger assembly, confirming proper operation and no visible leaks. Verified condensate drain lines are clear and functioning correctly, and documented system condition with photos showing all major components in operational status.

Completed annual cooling maintenance on residential HVAC system. Performed comprehensive inspection of outdoor condenser unit, checking electrical components and measuring capacitor reading of 9.6 MFD using digital multimeter. Replaced air filter and conducted hot water tank inspection as part of scheduled preventive maintenance service.

Returned to site to complete HVAC installation. Finalized outdoor condensing unit placement and secured refrigerant line set with proper fasteners. Verified unit is level on pad with adequate clearance from structure for airflow and future serviceability. Installation now complete and system operational.

Completed comprehensive tune-up on outdoor air conditioning unit over 10 years old located on exterior wooden deck adjacent to brick structure. Performed full system inspection including access to electrical components, verified proper operation of capacitor and contactor with all wire connections secure, and confirmed unit functionality. System cleaned and serviced per manufacturer specifications with all components operating within normal parameters at time of service completion.

Completed on-site evaluation for air conditioner replacement estimate on a twenty-year-old existing system. Assessed current equipment condition, electrical panel capacity, and installation requirements for new AC unit to provide comprehensive replacement quote with available installation timeline.